Technical parameters
- Frequency range (Hz)
- 10 ~ 40000
- Zones
- 2
- Signal-to-noise ratio
- ⩾100dBA
- Min. output impedance (Ω)
- 4
- Continuous power (W)
- 2 x 60 (8Ω)
2 x 80 (4Ω) - Connectors
- 1 x 3.5mm jack (D input)
1 x Euroblock (Mic input)
1 x IR (3.5mm jack)
1 x RS232 (9-pin D-Sub)
2 x Euroblock (Right/left channel output)
2 x RCA (Line output)
2 x RCA (Link output, A input copy)
2 x RCA (Pre-amp out)
8 x RCA (A/B/C/D line input) - Power supply
- 230-240V AC; 50/60Hz
- Width (mm)
- 430
- Height (mm)
- 88 (2U)
- Depth (mm)
- 320
- Net weight (kg)
- 6.6
Product description
Concept1 is an integrated stereo amplifier supplied by Apart Audio (Biamp). Two-zone Concept1 can work both in one zone as a stereo system and in two zones with individual or joint volume control as a mono system. The RMS power of the device is equal to 60 watts at 8 ohms and 80 watts at 4 ohms per one channel.
The rear panel of the Concept1 amplifier is equipped with four unbalanced line inputs (8 x RCA), a balanced microphone input in the form of a Euroblock terminal, one pre-amp output (2 x RCA) and one line (2 x RCA) with a constant signal level. The user also has access to two outputs for the connection of right/left channel (Euroblock), the RS232 connector (which offers control options) and the IR port.
The front panel is equipped with an additional D line input, thanks to which it is possible to connect e.g. external audio device. The panel also contains four buttons for selecting the appropriate source (A-D), a selection button and a knob for adjusting the volume, treble, and bass.
The dimensions of the Apart Audio Concept1 amplifier (especially the height of 2U) allow the equipment to be installed in a 19-inch rack. SQM Multimedia Support recommends this amplifier.