Technical parameters

Standard
DMX512
Diode type
COB RGB
Power (W)
150
Beam angle (°)
60
Flash frequency (min/max; Hz)
1/28
Luminous flux (lm)
3682
Color temperature (K)
2800-9000
Dimmer (%)
0~100 (16-bit, electronic)
Connectors
2 x Neutrik powerCON (AC input/output)
2 x XLR (3-pin, Input/output)
2 x XLR (5-pin, Input/output)
Protection Level (IP)
IP20
Max. power consumption (W)
145
Supply voltage
100-240V AC; 50/60Hz
Width (mm)
262
Height (mm)
190
Depth (mm)
371
Net weight (kg)
4.5
Set contains
1 x Slim aluminium clamp
1 x Snap hook
1 x Wire rope sling
Power cord

Product description

The Prolights StudioCob FC is an ultra-efficient PAR reflector that features a 150W COB LED light source along with a coupled optical system.

The StudioCob FC PAR fixture allows a wide range of device setups - from an electric linear dimmer (in the range of 0-100%) with four dimmer curves, through color temperature presets ranging from 2800 to 9000 K, to virtual colour wheel with macros. The StudioCob FC also features a high refresh rate (from 600 to 25,000 Hz), a 60-degree beam angle, as well as a strobe function from 1 to 28 Hz.

The rear panel of the PAR reflector is equipped with signal connectors - 2 XLR inputs and outputs each (both 3-pin and 5-pin), and power connectors in the form of Neutrik powerCON input and output. The unit's peak power consumption is 140W. The device can be controlled via the DMX512 protocol, as well as from the position of the OLED display. The unit has a choice of 3, 5, or 8 DMX channels and Master/Slave communication.

Weighing just 4.5kg, the StudioCob FC PAR light dissipates heat perfectly - all thanks to active cooling and a housing made of cast aluminum. 

Rent a reliable Prolights StudioCob FC PAR fixture at SQM Rental House!

Attachments

StudioCob FC Specsheet

Download (431.81k)

StudioCob FC User guide

Download (3.55M)